GMCforum: GMCnet » OEM engine oil Cooler

Home » Public Forums » GMCnet » OEM engine oil Cooler (What does it look like internally?)

Show: Today's Messages :: Polls :: Message Navigator

OEM engine oil Cooler [message #236456]

Fri, 17 January 2014 20:01

gbarrow2

Messages: 765
Registered: February 2004
Location: Lake Almanor, Ca./ Red Bl...

Karma:

Senior Member

Any one ever cut up an OEM oil cooler or know of a picture or drawing of the internal configuration?

Is it just a continuation of the ~7/16 tube that mounts to the fittings on the back of the radiator end tank? Is it a single pass or double pass cooler? Does it have mild S curves entry to exit with no sharp bends to trap debris?

Can it be cleaned internally?

Is there a flush kit or tool (like a flexible rifle bore brush/patch that can be used to make sure that it is clean and reusable after an engine failure?

Gene Barrow
Lake Almanor, Ca.
1976 Palm Beach

Report message to a moderator

[Message index]

		OEM engine oil Cooler By: gbarrow2 on Fri, 17 January 2014 20:01
		Re: [GMCnet] OEM engine oil Cooler By: Sammy Williams on Fri, 17 January 2014 20:06
		Re: OEM engine oil Cooler By: Dennis S on Fri, 17 January 2014 20:33
		Re: OEM engine oil Cooler By: John Heslinga on Fri, 17 January 2014 23:51

Previous Topic:	[GMCnet] This Man sure has talent.
Next Topic:	Re: [GMCnet] dash radio

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Oct 10 09:26:09 CDT 2024

Total time taken to generate the page: 0.00740 seconds