|
[GMCnet] Re: my EFI Air cleaner [message #363939 is a reply to message #363938] |
Mon, 10 May 2021 23:41 |
James Hupy
Messages: 6806 Registered: May 2010
Karma: -62
|
Senior Member |
|
|
Take a look at the inlet diameter of the OEM snorkle air filter housing. It
is somewhere around 3" in diameter. So with that knowledge firmly within
your grasp, 4" exhaust tubing should be way more than adequate. But, the
"AMERICAN WAY" is always that bigger is better than smaller. But not always
necessary. Just my take on it.
Jim Hupy
Salem, Oregon
On Mon, May 10, 2021, 9:21 PM Keith V wrote:
> I finally, after way too much analysis brooding and reflection figured out
> a half decent way to mount a remote air cleaner.
>
> My criteria was:
> 1. It had to be a real air cleaner, not a oiled washable one that in
> reality never gets washed or oiled
> 2. It had to be serviceable, changing the filter should not require
> disassembling anything or suffering too much
> 3. it must draw in clean fresh cool air
> 4. The filter must be readily available
>
> I feel this install met all the above, #3 isn't optimal as the inlet is
> pointing down, but it's off to the side of the radiator and should be
> clean. I
> could possibly add ducting of I was so inclined
> It uses a Wix 46573 filter out of a 2001 to 2020 Duramax. It has 190
> square inches of surface area vs 110 for the stock filter.
> This is the outside diameter NOT filter area.
> Maybe Jim K can determine the actual filter area.
> I used the Spectre hat and their 4" ducting, it worked out well. the jeep
> hat seems too small and restrictive for my comfort
>
> Here is the bracket. This relocates the air tank closer to the fender
> allowing room for the filter
> http://www.gmcmhphotos.com/photos/data/7303/medium/20210508_105740.jpg
>
> here is how the air tank and filter mount to the bracket
> http://www.gmcmhphotos.com/photos/data/7303/20210508_125320.jpg
>
> here they are mounted in the coach
> http://www.gmcmhphotos.com/photos/data/7303/20210508_133152.jpg
>
> Here they are from the hood side. the front cover comes off and the filter
> is 'easily' replaceable
> http://www.gmcmhphotos.com/photos/data/7303/20210508_133219.jpg
>
> Here is the hat
> http://www.gmcmhphotos.com/photos/data/7303/20210418_195216.jpg
>
> --
> Keith Vasilakes
> Mounds View. MN
> 75 ex Royale GMC
> ask me about MicroLevel
> Cell, 763-732-3419
> My427v8@hotmail.com
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
|
|
|
Re: my EFI Air cleaner [message #363940 is a reply to message #363938] |
Tue, 11 May 2021 07:45 |
rjw
Messages: 697 Registered: September 2005
Karma: 4
|
Senior Member |
|
|
Interesting approach to get more air to your induction system. Nicely done.
I am curious as to the make and model that you used to find your "Spectre hat and their 4" ducting"?
Richard
76 Palm Beach
SE Michigan
www.PalmBeachGMC.com
Roller Cam 455, TBI+EBL, 3.42 FD, 4 Bag, Macerator, Lenzi (brakes, vacuum system, front end stuff), Manny Tranny, vacuum step, Tankless + OEM water heaters.
|
|
|
Re: my EFI Air cleaner [message #363943 is a reply to message #363938] |
Tue, 11 May 2021 08:51 |
lqqkatjon
Messages: 2324 Registered: October 2010 Location: St. Cloud, MN
Karma: 5
|
Senior Member |
|
|
you should of made 2. now I have to make my own!
Jon Roche
75 palm beach
EBL EFI, manny headers, Micro Level, rebuilt most of coach now.
St. Cloud, MN
http://lqqkatjon.blogspot.com/
|
|
|
[GMCnet] Re: my EFI Air cleaner [message #363946 is a reply to message #363943] |
Tue, 11 May 2021 10:45 |
sgltrac
Messages: 2797 Registered: April 2011
Karma: 1
|
Senior Member |
|
|
James,
Upload some pics of the air intake off The Pig.
Sully
Bellevue wa.
On Tue, May 11, 2021 at 6:52 AM Jon Roche wrote:
> you should of made 2. now I have to make my own!
>
> --
> Jon Roche
> 75 palm beach
> EBL EFI, manny headers, Micro Level, rebuilt most of coach now.
> St. Cloud, MN
> http://lqqkatjon.blogspot.com/
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Sully
77 Royale basket case.
Future motorhome land speed record holder(bucket list)
Seattle, Wa.
|
|
|
[GMCnet] Re: my EFI Air cleaner [message #363947 is a reply to message #363943] |
Tue, 11 May 2021 10:45 |
Keith V
Messages: 2337 Registered: March 2008 Location: Mounds View,MN
Karma: 0
|
Senior Member |
|
|
Jon,
well now you know how to do it!
I moved the air tank over exactly that the right mounting bolts lined up with the left bracket holes. The air cleaner was welded insitu and i have zero measurements. But it was shoved uo against the frame as much as possible
RJW, the spectre hat and hose are easily found.
Here is the hat on Amazon
https://www.amazon.com/Spectre-Performance-Polished-Profile-Single/dp/B004AJ6GIC/ref=mp_s_a_1_9?dchild=1&keywords=carburetor+hat&qid=162074754 5&sr=8-9
James, they make bigger filters! This was basically the best compromise I almost made my own housing
________________________________
From: Jon Roche
Sent: Tuesday, May 11, 2021 8:51:54 AM
To: gmclist@list.gmcnet.org
Subject: [GMCnet] Re: my EFI Air cleaner
you should of made 2. now I have to make my own!
--
Jon Roche
75 palm beach
EBL EFI, manny headers, Micro Level, rebuilt most of coach now.
St. Cloud, MN
http://lqqkatjon.blogspot.com/
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com
|
|
|
Re: [GMCnet] Re: my EFI Air cleaner [message #363955 is a reply to message #363947] |
Tue, 11 May 2021 19:22 |
rjw
Messages: 697 Registered: September 2005
Karma: 4
|
Senior Member |
|
|
Keith V wrote on Tue, 11 May 2021 11:45
RJW, the spectre hat and hose are easily found.
Here is the hat on Amazon
https://www.amazon.com/Spectre-Performance-Polished-Profile-Single/dp/B004AJ6GIC/ref=mp_s_a_1_9?dchild=1&keywords=carburetor+hat&qid=162074754 5&sr=8-9
Thanks for the link.
Richard
76 Palm Beach
SE Michigan
www.PalmBeachGMC.com
Roller Cam 455, TBI+EBL, 3.42 FD, 4 Bag, Macerator, Lenzi (brakes, vacuum system, front end stuff), Manny Tranny, vacuum step, Tankless + OEM water heaters.
|
|
|
Re: my EFI Air cleaner [message #370073 is a reply to message #363938] |
Tue, 05 July 2022 20:04 |
cadelec
Messages: 303 Registered: September 2011 Location: Brisbane Australia
Karma: 1
|
Senior Member |
|
|
Keith
I have a K&N filter and want to change to a paper style replacement
Do you know what that air box came out of as it looks like it is something i could work with
when i search duramax i get a lot of different options but none of them show the
round cylindrical housing you have in your photos
Trevor
Brisbane Australia
Siesta Koala 76 Edgemont (old Bobby Moores)
71 Cadillac Eldo Convert
58 Cadillac Eldorado Brougham Project
|
|
|
Re: my EFI Air cleaner [message #370081 is a reply to message #370073] |
Thu, 07 July 2022 16:14 |
Keith V
Messages: 2337 Registered: March 2008 Location: Mounds View,MN
Karma: 0
|
Senior Member |
|
|
Sorry no, that was last year and I got out of a junkyard, Duramax is all I know.
Shoulda taken a picture of it's origin
Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com
|
|
|
[GMCnet] Re: my EFI Air cleaner [message #370082 is a reply to message #363938] |
Thu, 07 July 2022 16:14 |
Keith V
Messages: 2337 Registered: March 2008 Location: Mounds View,MN
Karma: 0
|
Senior Member |
|
|
Sorry no, that was last year and I got out of a junkyard, Duramax is all I know.
Shoulda taken a picture of it's origin
--
Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com
|
|
|
Re: my EFI Air cleaner [message #370083 is a reply to message #363938] |
Thu, 07 July 2022 19:48 |
winter
Messages: 247 Registered: September 2007 Location: MPLS MN
Karma: 0
|
Senior Member |
|
|
A quick compatibility check online shows Wix 46573 came out of a mid 2000s gm van. Pics of the air box look about the same also. I didn't come out of a Duramax pickup as those air boxes are square.
I did have a round air box out of a 2 ton truck with a Duramax but I think that was a larger tube and bigger filter.
Jerrod Winter
1977 Palm Beach
Green Jelly Bean
Twin Cities, Minnesota
|
|
|
Re: my EFI Air cleaner [message #370084 is a reply to message #363938] |
Thu, 07 July 2022 19:50 |
winter
Messages: 247 Registered: September 2007 Location: MPLS MN
Karma: 0
|
Senior Member |
|
|
Does that air box get rid of the intake drone? If so I might need to try something similar.
Jerrod Winter
1977 Palm Beach
Green Jelly Bean
Twin Cities, Minnesota
|
|
|
[GMCnet] Re: my EFI Air cleaner [message #370085 is a reply to message #363938] |
Thu, 07 July 2022 19:50 |
winter
Messages: 247 Registered: September 2007 Location: MPLS MN
Karma: 0
|
Senior Member |
|
|
Does that air box get rid of the intake drone? If so I might need to try something similar.
--
Jerrod Winter
1977 Palm Beach
Green Jelly Bean
Twin Cities, Minnesota
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Jerrod Winter
1977 Palm Beach
Green Jelly Bean
Twin Cities, Minnesota
|
|
|
[GMCnet] Re: my EFI Air cleaner [message #370086 is a reply to message #363938] |
Thu, 07 July 2022 19:48 |
winter
Messages: 247 Registered: September 2007 Location: MPLS MN
Karma: 0
|
Senior Member |
|
|
A quick compatibility check online shows Wix 46573 came out of a mid 2000s gm van. Pics of the air box look about the same also. I didn't come out
of a Duramax pickup as those air boxes are square.
I did have a round air box out of a 2 ton truck with a Duramax but I think that was a larger tube and bigger filter.
--
Jerrod Winter
1977 Palm Beach
Green Jelly Bean
Twin Cities, Minnesota
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
Jerrod Winter
1977 Palm Beach
Green Jelly Bean
Twin Cities, Minnesota
|
|
|
Re: [GMCnet] Re: my EFI Air cleaner [message #370122 is a reply to message #370086] |
Mon, 11 July 2022 13:46 |
Keith V
Messages: 2337 Registered: March 2008 Location: Mounds View,MN
Karma: 0
|
Senior Member |
|
|
A van does sound familiar
and yes the cab is WAY quieter with the new air cleaner. I think it's the solid aluminum hat and the fact that the actual air intake is quite a ways away from the floor.
I can't imagine that a sheetmetal air cleaner doesn't make a great sounding board!
Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com
|
|
|
Re: my EFI Air cleaner [message #370129 is a reply to message #363938] |
Tue, 12 July 2022 19:51 |
winter
Messages: 247 Registered: September 2007 Location: MPLS MN
Karma: 0
|
Senior Member |
|
|
Looking at assemblies on line there also appears to be a resonator tube that plugs into that air box. May quiet it down even more.
Jerrod Winter
1977 Palm Beach
Green Jelly Bean
Twin Cities, Minnesota
|
|
|
|
Re: my EFI Air cleaner [message #370144 is a reply to message #363938] |
Tue, 19 July 2022 12:14 |
Keith V
Messages: 2337 Registered: March 2008 Location: Mounds View,MN
Karma: 0
|
Senior Member |
|
|
It's close, mine had a different end where it connects to the air cleaner.
yours may work, That elbow looks nice, but the resonator would take up a lot of space. I'd remove it
Also check that the elbow is 4" so the hose will connect
Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com
|
|
|
|