Home » Public Forums » GMCnet » Onan parts
Onan parts [message #348762] |
Tue, 01 October 2019 09:51 |
Tilerpep
Messages: 404 Registered: June 2013 Location: Raleigh, NC
Karma: 7
|
Senior Member |
|
|
I have an onan that most parts already gone (starter, board, exhaust) and wondering before i scrap it if there are parts people want or have a suggestion for stuff that is worth the space/weight to save for myself. I'm in Raleigh, NC
Tyler
1975 Glenbrook, 1978 Royale rear bath
Raleigh, NC
|
|
|
|
Re: [GMCnet] Onan parts [message #348777 is a reply to message #348764] |
Tue, 01 October 2019 11:16 |
Bruce Hart
Messages: 1501 Registered: October 2011 Location: La Grange, Wyoming
Karma: 5
|
Senior Member |
|
|
Tyler,
Do you still have the slides and the four mounting brackets that hold the
donuts?
On Tue, Oct 1, 2019 at 8:58 AM Emery Stora via Gmclist <
gmclist@list.gmcnet.org> wrote:
> Tyler
> I could use the choke if it available. Let me know what you want for it.
> Thank you.
>
> Emery Stora
> 77 Kingsley
> Frederick CO
>
>> On Oct 1, 2019, at 8:51 AM, Tyler via Gmclist
> wrote:
>>
>> I have an onan that most parts already gone (starter, board, exhaust)
> and wondering before i scrap it if there are parts people want or have a
>> suggestion for stuff that is worth the space/weight to save for myself.
> I'm in Raleigh, NC
>> Tyler
>> --
>> 1975 Glenbrook, 1978 Royale rear bath
>> Raleigh, NC
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Bruce Hart
1976 Palm Beach
1977 28' Kingsley
La Grange, Wyoming
|
|
|
Re: Onan parts [message #348979 is a reply to message #348762] |
Sun, 06 October 2019 18:43 |
Tilerpep
Messages: 404 Registered: June 2013 Location: Raleigh, NC
Karma: 7
|
Senior Member |
|
|
Emery, I'm moving the choke to the one in the coach, as the electrical closer actually works!
Bruce, I don't have the slides, but do have the rear brackets. I'm keeping the rubber donuts as they are in good shape. PM me here on the forum if just the rear brackets are worth messing with.
Another contacted me about the carb. The bolt that holds the bowl on is stripped up in the main body. I would like to keep it for a spare myself, has anyone had success with a heli-coil or something up in that (I presume aluminum) body?
Thanks
Tyler
1975 Glenbrook, 1978 Royale rear bath
Raleigh, NC
|
|
|
Re: Onan parts [message #348984 is a reply to message #348979] |
Sun, 06 October 2019 20:57 |
|
Matt Colie
Messages: 8547 Registered: March 2007 Location: S.E. Michigan
Karma: 7
|
Senior Member |
|
|
Tilerpep wrote on Sun, 06 October 2019 19:43Emery, I'm moving the choke to the one in the coach, as the electrical closer actually works!
Bruce, I don't have the slides, but do have the rear brackets. I'm keeping the rubber donuts as they are in good shape. PM me here on the forum if just the rear brackets are worth messing with.
Another contacted me about the carb. The bolt that holds the bowl on is stripped up in the main body. I would like to keep it for a spare myself, has anyone had success with a heli-coil or something up in that (I presume aluminum) body?
Thanks
Tyler
Tyler,
Hang onto the fly wheel as many have been damaged by mis-handling.
Jim Miller does a lot of successful Onan repair and he may have some interest too.
Matt
Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
|
|
|
Re: [GMCnet] Onan parts [message #348994 is a reply to message #348984] |
Mon, 07 October 2019 00:15 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Contact Jim Miller as he has parts in Ohio. ( 513)615-3894
He and I work together .
On Sun, Oct 6, 2019 at 6:58 PM Matt Colie via Gmclist <
gmclist@list.gmcnet.org> wrote:
> Tilerpep wrote on Sun, 06 October 2019 19:43
>> Emery, I'm moving the choke to the one in the coach, as the electrical
> closer actually works!
>>
>> Bruce, I don't have the slides, but do have the rear brackets. I'm
> keeping the rubber donuts as they are in good shape. PM me here on the
> forum if
>> just the rear brackets are worth messing with.
>>
>> Another contacted me about the carb. The bolt that holds the bowl on is
> stripped up in the main body. I would like to keep it for a spare myself,
>> has anyone had success with a heli-coil or something up in that (I
> presume aluminum) body?
>>
>> Thanks
>> Tyler
>
> Tyler,
>
> Hang onto the fly wheel as many have been damaged by mis-handling.
> Jim Miller does a lot of successful Onan repair and he may have some
> interest too.
>
> Matt
>
> --
> Matt & Mary Colie - '73 Glacier 23 - Members GMCMI, GMCGL, GMCES
> Electronically Controlled Quiet Engine Cooling Fan
> OE Rear Drum Brakes with Applied Control Arms
> SE Michigan - Twixt A2 and Detroit
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
Re: [GMCnet] Onan parts [message #349002 is a reply to message #348994] |
Mon, 07 October 2019 08:41 |
Bruce Hart
Messages: 1501 Registered: October 2011 Location: La Grange, Wyoming
Karma: 5
|
Senior Member |
|
|
Tyler,
By the time you drill out and tap for heli-coil you might just want to up
the fastener size to a 5/16"-18
Heli-coil drill is .263" and F drill for 5/16" fastener is 2.57
On Sun, Oct 6, 2019 at 11:15 PM Jim Kanomata via Gmclist <
gmclist@list.gmcnet.org> wrote:
> Contact Jim Miller as he has parts in Ohio. ( 513)615-3894
> He and I work together .
>
> On Sun, Oct 6, 2019 at 6:58 PM Matt Colie via Gmclist gmclist@list.gmcnet.org> wrote:
>
>> Tilerpep wrote on Sun, 06 October 2019 19:43
>>> Emery, I'm moving the choke to the one in the coach, as the electrical
>> closer actually works!
>>>
>>> Bruce, I don't have the slides, but do have the rear brackets. I'm
>> keeping the rubber donuts as they are in good shape. PM me here on the
>> forum if
>>> just the rear brackets are worth messing with.
>>>
>>> Another contacted me about the carb. The bolt that holds the bowl on is
>> stripped up in the main body. I would like to keep it for a spare myself,
>>> has anyone had success with a heli-coil or something up in that (I
>> presume aluminum) body?
>>>
>>> Thanks
>>> Tyler
>>
>> Tyler,
>>
>> Hang onto the fly wheel as many have been damaged by mis-handling.
>> Jim Miller does a lot of successful Onan repair and he may have some
>> interest too.
>>
>> Matt
>>
>> --
>> Matt & Mary Colie - '73 Glacier 23 - Members GMCMI, GMCGL, GMCES
>> Electronically Controlled Quiet Engine Cooling Fan
>> OE Rear Drum Brakes with Applied Control Arms
>> SE Michigan - Twixt A2 and Detroit
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
> --
> Jim Kanomata
> Applied/GMC, Newark,CA
> jimk@appliedairfilters.com
> http://www.appliedgmc.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Bruce Hart
1976 Palm Beach
1977 28' Kingsley
La Grange, Wyoming
|
|
|
Re: [GMCnet] Onan parts [message #349004 is a reply to message #349002] |
Mon, 07 October 2019 08:57 |
James Hupy
Messages: 6806 Registered: May 2010
Karma: -62
|
Senior Member |
|
|
Those carb bodies are "white metal, or pot metal" mostly a zinc, tin,
antimony, alloy. Not much aluminum present. It is not known for it's long
life or ability to be easily machined. It's main claim to fame is that it
is inexpensive and easily cast by automated machinery.
Soooooo, when you strip a thread in the float chamber which has been
exposed to crapahol gasoline for 30 years, odds are good that your efforts
to restore those threads will be in vain.
Better to find an unstripped one.
Jim Hupy
Salem, Or
On Mon, Oct 7, 2019, 6:42 AM Bruce Hart via Gmclist
wrote:
> Tyler,
> By the time you drill out and tap for heli-coil you might just want to up
> the fastener size to a 5/16"-18
>
> Heli-coil drill is .263" and F drill for 5/16" fastener is 2.57
>
> On Sun, Oct 6, 2019 at 11:15 PM Jim Kanomata via Gmclist gmclist@list.gmcnet.org> wrote:
>
>> Contact Jim Miller as he has parts in Ohio. ( 513)615-3894
>> He and I work together .
>>
>> On Sun, Oct 6, 2019 at 6:58 PM Matt Colie via Gmclist > gmclist@list.gmcnet.org> wrote:
>>
>>> Tilerpep wrote on Sun, 06 October 2019 19:43
>>>> Emery, I'm moving the choke to the one in the coach, as the
> electrical
>>> closer actually works!
>>>>
>>>> Bruce, I don't have the slides, but do have the rear brackets. I'm
>>> keeping the rubber donuts as they are in good shape. PM me here on the
>>> forum if
>>>> just the rear brackets are worth messing with.
>>>>
>>>> Another contacted me about the carb. The bolt that holds the bowl on
> is
>>> stripped up in the main body. I would like to keep it for a spare
> myself,
>>>> has anyone had success with a heli-coil or something up in that (I
>>> presume aluminum) body?
>>>>
>>>> Thanks
>>>> Tyler
>>>
>>> Tyler,
>>>
>>> Hang onto the fly wheel as many have been damaged by mis-handling.
>>> Jim Miller does a lot of successful Onan repair and he may have some
>>> interest too.
>>>
>>> Matt
>>>
>>> --
>>> Matt & Mary Colie - '73 Glacier 23 - Members GMCMI, GMCGL, GMCES
>>> Electronically Controlled Quiet Engine Cooling Fan
>>> OE Rear Drum Brakes with Applied Control Arms
>>> SE Michigan - Twixt A2 and Detroit
>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>
>> --
>> Jim Kanomata
>> Applied/GMC, Newark,CA
>> jimk@appliedairfilters.com
>> http://www.appliedgmc.com
>> 1-800-752-7502
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>
>
> --
> Bruce Hart
> 1976 Palm Beach
> Milliken, Co
> GMC=Got More Class
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
Re: Onan parts [message #349009 is a reply to message #348762] |
Mon, 07 October 2019 10:49 |
jhbridges
Messages: 8412 Registered: May 2011 Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
I've interest in the alternator. One of the two in my shop was given claimibng a bad alternator.
--johnny
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
Re: Onan parts [message #349073 is a reply to message #349009] |
Tue, 08 October 2019 13:55 |
Tilerpep
Messages: 404 Registered: June 2013 Location: Raleigh, NC
Karma: 7
|
Senior Member |
|
|
Johnny,
Is the alternator the blue lump circle inside the flywheel?
T
1975 Glenbrook, 1978 Royale rear bath
Raleigh, NC
|
|
|
Re: Onan parts [message #349107 is a reply to message #348762] |
Wed, 09 October 2019 11:31 |
jhbridges
Messages: 8412 Registered: May 2011 Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
I'm interested in the main alternator hooked to the rear of the engine.
--johnny
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
Re: [GMCnet] Onan parts [message #349314 is a reply to message #349107] |
Tue, 15 October 2019 13:35 |
Bruce Hart
Messages: 1501 Registered: October 2011 Location: La Grange, Wyoming
Karma: 5
|
Senior Member |
|
|
Johnny, I am still confused as to what it is you want. Would it be the
voltage regulator that sits under the fuel pump?
On Wed, Oct 9, 2019 at 10:32 AM Johnny Bridges via Gmclist <
gmclist@list.gmcnet.org> wrote:
> I'm interested in the main alternator hooked to the rear of the engine.
>
> --johnny
> --
> Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
> Braselton, Ga.
> I forgive them all, save those who hurt the dogs. They must answer to me
> in hell
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Bruce Hart
1976 Palm Beach
1977 28' Kingsley
La Grange, Wyoming
|
|
|
Goto Forum:
Current Time: Tue Oct 08 11:41:27 CDT 2024
Total time taken to generate the page: 0.05153 seconds
|