GMCforum: GMCnet » good we are online again Olga update

Home » Public Forums » GMCnet » good we are online again Olga update

Show: Today's Messages :: Polls :: Message Navigator

good we are online again Olga update [message #249180]

Fri, 09 May 2014 00:06

appie

Messages: 902
Registered: April 2013
Location: denmark

Karma: 2

Senior Member

Missed the forum the last days

Had a airleak in the pump/valves area for a while and decided to do something about that
Thought it was the pressureswitch that was definitly not oem and got a viair one That was not the problem It is very difficult the find the leak with all these connections in one tight place
Now it is either a speciffik valve or the threaded connection to this valve
I ll go in town and buy some threadseal and hope it is that

Have been chasing a waterleak for months in the bedroom Found it now: Olga had a slight accident at some time, hence the fiberglassrepair on the left rearcorner and a slight dent on the far rear rubline
No the leak is through the H profile that connects the fiberglas bottom with the alu topside The accident broke the glue and the water running down the side runs through the H
'Hope the glue I added will hold

As to engine
I booked the workshop for next weekend where we have a 3 day weekend, but there are a few small problems
Dick Paterson has been very helpsome, but he a small accident that put him back a day Then I got a mail from him that he was rejected at the forwarder becource he used the wrong pallet: All wood tp europe has to be treated and stamped accordingly ! Bummer That means a other 150 Miles for him and for it means getting very close to my deadline I am very exited to get a ETA from the forwarder

I'll put som photos of the engine on the photoside Does not look like much The beauty is inside

Appie eleganza 76 "Olga" now sadly sold 6 wheel discbrake Quadrabags Springfield stage 2 462 olds Manny tranny ( pictures at http://www.gmcmhphotos.com/photos/g6489-olga.html Fulltiming in Europe july 2014 til july 2016 Denmark

Report message to a moderator

Re: good we are online again Olga update [message #249182 is a reply to message #249180]

Fri, 09 May 2014 00:45

Ken Burton

Messages: 10030
Registered: January 2004
Location: Hebron, Indiana

Karma: 10

Senior Member

Try using some gas leak detector. Coat the connections with it. It will make large bubbles. Also the original GMC lines used plastic connectors on them. I had a difficult time finding my leaks. I finally just replaced the connectors with brass connectors. All of my leaks disappeared.

At the time I replaced mine they were $1.50 to $2.00 each. Today they are probably $3.00 each. Around here they are available at some good auto parts stores because they are used on truck air brakes. They are also used in some plumbing situations and are available at home improvement stores.

https://www.google.com/search?q=Gas+leak+fluid&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a&channel= sb

Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana

Report message to a moderator

Re: good we are online again Olga update [message #249200 is a reply to message #249180]

Fri, 09 May 2014 07:32

jhbridges

Messages: 8412
Registered: May 2011
Location: Braselton ga

Karma: -74

Senior Member

Gas Leak Detector = bubble juice from the toy section of Wal-Mart.. or any toy store. Works about as well as the commercial stuff for less loot.

--johnny

Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell

Report message to a moderator

Previous Topic:	Fuel Return
Next Topic:	exhaust

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Nov 16 11:36:00 CST 2024

Total time taken to generate the page: 0.02524 seconds