Home » Public Forums » GMCnet » [GMCnet] bean station
| [GMCnet] bean station [message #238921] |
Wed, 05 February 2014 19:11  |
jhbridges
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
Anyone going to Bean Station who has installed one of the reaction arm systems for drums as provided by JimK? I just ordered shoes and hardware, I have on hand the arm kit, new wheel cylinders, and a new valve. I propose to do mine and likely Stick's... and it sure would be nice to have a guru wander by every now and again and say "DON'T DO THAT!!!!" just before I screw something up.
--johnny
'76 23' transmode norris
'88 302CID Ranger toad
Braselton, GA
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
|
| Re: [GMCnet] bean station [message #238933 is a reply to message #238921] |
Wed, 05 February 2014 20:28  |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Matt Colie and Tom Prior installed a set at Bean station.
I'm sure we can do one again as there has been some changes done to make it
easier to install them.
Tom spent a week here doing tests on the units.
I took Tom for a quick ride on my 540 Cad, he was more then impressed, but
blew a head gasket as the machine shop did not torque the head properly.
I run studs in the block, so the engine need to come out for me to do the
head work.
On Wed, Feb 5, 2014 at 5:11 PM, Johnny Bridges <jhbridges@ymail.com> wrote:
> Anyone going to Bean Station who has installed one of the reaction arm
> systems for drums as provided by JimK? I just ordered shoes and hardware,
> I have on hand the arm kit, new wheel cylinders, and a new valve. I
> propose to do mine and likely Stick's... and it sure would be nice to have
> a guru wander by every now and again and say "DON'T DO THAT!!!!" just
> before I screw something up.
>
> --johnny
> '76 23' transmode norris
> '88 302CID Ranger toad
>
> Braselton, GA
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] bean station [message #238949 is a reply to message #238933] |
Thu, 06 February 2014 07:29 |
jhbridges
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
Given the very comprehensive directions and pictures, even I ought to have no problems. But, belt and suspenders.....
--johnny
________________________________
From: Jim Kanomata <jimkanomata@gmail.com>
To: gmclist@temp.gmcnet.org
Sent: Wednesday, February 5, 2014 9:28 PM
Subject: Re: [GMCnet] bean station
Matt Colie and Tom Prior installed a set at Bean station.
I'm sure we can do one again as there has been some changes done to make it
easier to install them.
Tom spent a week here doing tests on the units.
I took Tom for a quick ride on my 540 Cad, he was more then impressed, but
blew a head gasket as the machine shop did not torque the head properly.
I run studs in the block, so the engine need to come out for me to do the
head work.
On Wed, Feb 5, 2014 at 5:11 PM, Johnny Bridges <jhbridges@ymail.com> wrote:
> Anyone going to Bean Station who has installed one of the reaction arm
> systems for drums as provided by JimK? I just ordered shoes and hardware,
> I have on hand the arm kit, new wheel cylinders, and a new valve. I
> propose to do mine and likely Stick's... and it sure would be nice to have
> a guru wander by every now and again and say "DON'T DO THAT!!!!" just
> before I screw something up.
>
> --johnny
> '76 23' transmode norris
> '88 302CID Ranger toad
>
> Braselton, GA
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com/
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
|
| Re: [GMCnet] bean station [message #238951 is a reply to message #238921] |
Thu, 06 February 2014 08:02 |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Johnny,
While I didn't directly participate in the installation on Matt's coach, I
was working on a Manny Brake installation right beside them and tried to
observe. And I saw Tom's first prototype long before that operation. So,
perhaps I can be of some assistance, though I can't imagine your having any
problem. It's a pretty straight-forward design and installation. I
probably won't be doing much wrenching though, because I've already
committed to help with a 1-Ton installation.
Ken H.
On Wed, Feb 5, 2014 at 8:11 PM, Johnny Bridges wrote:
Anyone going to Bean Station who has installed one of the reaction arm
> systems for drums as provided by JimK? I just ordered shoes and hardware,
> I have on hand the arm kit, new wheel cylinders, and a new valve. I
> propose to do mine and likely Stick's... and it sure would be nice to have
> a guru wander by every now and again and say "DON'T DO THAT!!!!" just
> before I screw something up.
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
| Re: [GMCnet] bean station [message #239059 is a reply to message #238951] |
Fri, 07 February 2014 07:56 |
stick miller
Messages: 1036
Registered: March 2010
Location: Americus, Georgia
Karma: 0
|
Senior Member |
|
|
Johnny and all - just to be clear, my reaction arm is the Manny type with disc brakes. I'd like to get some help with it, if possible. I need to get it out of Ken Henderson's shop.
Sign me up.
Stick Miller
'78 Royale - "White Trash" - she left me for another man
'76 Eleganza - "Cousin Eddie" Sold
'84 Bluebird Wanderlodge - "Past Tents"
Americus, GA
|
|
|
|
| Re: [GMCnet] bean station [message #239064 is a reply to message #239059] |
Fri, 07 February 2014 08:20 |
jhbridges
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
OK. Mine's for drums. We will learn both systems.
--johnny
'76 23' transmiode norris
From: Stick Miller <stickmiller@gmail.com>
To: gmclist@temp.gmcnet.org
Sent: Friday, February 7, 2014 8:56 AM
Subject: Re: [GMCnet] bean station
Johnny and all - just to be clear, my reaction arm is the Manny type with disc brakes. I'd like to get some help with it, if possible. I need to get it out of Ken Henderson's shop.
Sign me up.
--
Stick Miller
'78 Royale - she left me for another man
'76 Eleganza - "Cousin Eddie"
Americus, Georgia
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
|
Goto Forum:
Current Time: Fri Nov 15 14:41:39 CST 2024
Total time taken to generate the page: 0.00855 seconds
|
GMCforum
Search
Help
Register
Login
Home
