| [GMCnet] Warner Front Wheel Bearing Puller [message #236186] |
Tue, 14 January 2014 20:03  |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
We're having a great time in Tampa at Lazy Days. Arrived last Friday after
an uneverntful 354 miles from home. Spent the weekend visiting with our
Sunshine Statesmen friends who wrapped up that rally on Sunday. Yesterday
they were replaced by our Dixielanders.
Lazy Days has really outdone themselves with the meals. Tonight we had all
we could eat of delicious, tender prime rib with all the fixin's.
Today Ron Tase, whom some of you probably remember for his beautiful 31'
stretch which he completed in ~2000 -- just in time for us to meet them,
for the first time, in Juneau, AK. Since they've long since moved on to an
SOB (a very unique one, by the way), he offered me his unused Tom Warner
front wheel bearing puller.
For those who don't know, Tom was an active GMCer back 8-10 years ago.
Very knowledgeable and a productive engineer, he could also be very
abrasive (and abusive) -- he got banned from this site. Eventually he sold
his GMC and moved to Bluebird. But during his "GMC Life", he designed and
produced a very satisfactory wheel bearing puller which many of us bought
and used. It's very similar to that illustrated in the GMC manuals, but
uses a high quality OTC general purpose puller as the forcing tool.
The instructions for use of that tool should be here:
http://www.bdub.net/FrontWheelBearingR.eplacementProceduresR1.pdf<http://www.bdub.net/FrontWheelBearingReplacementProceduresR1.pdf>
If you're interested in purchasing that tool, at a very reasonable price,
contact Ron at Three 21 Five fourteen zero 7 ten.
Ken H.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
| Re: [GMCnet] Warner Front Wheel Bearing Puller [message #236196 is a reply to message #236186] |
Wed, 15 January 2014 00:05  |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Ken,
We stock Tom Warners puller after he geneusly allowed us to make them.
Tom produced considerably more unts an were able to control cost.
On Tue, Jan 14, 2014 at 6:03 PM, Ken Henderson <hend4800@bellsouth.net>wrote:
> We're having a great time in Tampa at Lazy Days. Arrived last Friday after
> an uneverntful 354 miles from home. Spent the weekend visiting with our
> Sunshine Statesmen friends who wrapped up that rally on Sunday. Yesterday
> they were replaced by our Dixielanders.
>
> Lazy Days has really outdone themselves with the meals. Tonight we had all
> we could eat of delicious, tender prime rib with all the fixin's.
>
> Today Ron Tase, whom some of you probably remember for his beautiful 31'
> stretch which he completed in ~2000 -- just in time for us to meet them,
> for the first time, in Juneau, AK. Since they've long since moved on to an
> SOB (a very unique one, by the way), he offered me his unused Tom Warner
> front wheel bearing puller.
>
> For those who don't know, Tom was an active GMCer back 8-10 years ago.
> Very knowledgeable and a productive engineer, he could also be very
> abrasive (and abusive) -- he got banned from this site. Eventually he sold
> his GMC and moved to Bluebird. But during his "GMC Life", he designed and
> produced a very satisfactory wheel bearing puller which many of us bought
> and used. It's very similar to that illustrated in the GMC manuals, but
> uses a high quality OTC general purpose puller as the forcing tool.
>
> The instructions for use of that tool should be here:
> http://www.bdub.net/FrontWheelBearingR.eplacementProceduresR1.pdf<
> http://www.bdub.net/FrontWheelBearingReplacementProceduresR1.pdf>
>
> If you're interested in purchasing that tool, at a very reasonable price,
> contact Ron at Three 21 Five fourteen zero 7 ten.
>
> Ken H.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
