GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Filling the GMC with gas in California.
Filling the GMC with gas in California. [message #235592] Thu, 09 January 2014 10:52 Go to next message
Larry is currently offline  Larry   United States
Messages: 2875
Registered: January 2004
Location: Menomonie, WI
Karma: 10
Senior Member
I've only filled my GMC with gas once several years ago, and the experience left me with about 2 gallons of gas on me,the coach, and the cement pad around me. I used a 2" cutoff from a foam noodle to adapt the dispenser to the GMC filler. (a suggestion I found on the GMCnet) The dispenser did not cut off when full and pumped in extra gas...I figure expanding the tanks a little. When things didn't seem right to me, I manually shut it off and removed the nozzle. A lot of gas gushed out soaking me, the coach and the station pump.

I filled with fuel at the Arizona border before entering California. I plan to do some traveling here, so do not want to experience a spill like this again.

What did I do wrong and what is the proper way to fill the GMC with fuel in California?


Larry Smile
78 Royale w/500 Caddy
Menomonie, WI.
Re: Filling the GMC with gas in California. [message #235604 is a reply to message #235592] Thu, 09 January 2014 11:44 Go to previous messageGo to next message
armandminnie is currently offline  armandminnie   United States
Messages: 864
Registered: May 2009
Location: Marana, AZ
Karma: 2
Senior Member
Larry, the problem with that foam piece (as you now know)is that it can block the air from venting during fill - the rubber vapor-capture rig on the nozzle pulls the vapors back in. I also had a problem with the foam disintegrating when it contacted gasoline fumes. I use an ABS union (2-inch I think)that I cut off at an angle on my chop saw. It works great - might work without the angle too.

Armand Minnie
Marana, AZ
'76 Eleganza II TZE166V103202
visit my gmc blog
click here to visit gmcws.org
Re: Filling the GMC with gas in California. [message #235607 is a reply to message #235604] Thu, 09 January 2014 11:50 Go to previous messageGo to next message
Larry is currently offline  Larry   United States
Messages: 2875
Registered: January 2004
Location: Menomonie, WI
Karma: 10
Senior Member
armandminnie wrote on Thu, 09 January 2014 11:44

Larry, the problem with that foam piece (as you now know)is that it can block the air from venting during fill - the rubber vapor-capture rig on the nozzle pulls the vapors back in. I also had a problem with the foam disintegrating when it contacted gasoline fumes. I use an ABS union (2-inch I think)that I cut off at an angle on my chop saw. It works great - might work without the angle too.

Thanks Armand, How thick did you make the cut-off union?


Larry Smile
78 Royale w/500 Caddy
Menomonie, WI.
Re: Filling the GMC with gas in California. [message #235611 is a reply to message #235607] Thu, 09 January 2014 12:14 Go to previous messageGo to next message
armandminnie is currently offline  armandminnie   United States
Messages: 864
Registered: May 2009
Location: Marana, AZ
Karma: 2
Senior Member
Larry wrote on Thu, 09 January 2014 10:50

armandminnie wrote on Thu, 09 January 2014 11:44



Thanks Armand, How thick did you make the cut-off union?


I just chopped about 1/2" or a little more off one side so it leans out to receive the nozzle.


Armand Minnie
Marana, AZ
'76 Eleganza II TZE166V103202
visit my gmc blog
click here to visit gmcws.org
Re: Filling the GMC with gas in California. [message #235613 is a reply to message #235611] Thu, 09 January 2014 12:42 Go to previous messageGo to next message
Larry is currently offline  Larry   United States
Messages: 2875
Registered: January 2004
Location: Menomonie, WI
Karma: 10
Senior Member
armandminnie wrote on Thu, 09 January 2014 12:14

Larry wrote on Thu, 09 January 2014 10:50

armandminnie wrote on Thu, 09 January 2014 11:44



Thanks Armand, How thick did you make the cut-off union?


I just chopped about 1/2" or a little more off one side so it leans out to receive the nozzle.


Thanks, I have to go to Home Depot today anyway and will look for a union then.


Larry Smile
78 Royale w/500 Caddy
Menomonie, WI.
Re: [GMCnet] Filling the GMC with gas in California. [message #235614 is a reply to message #235607] Thu, 09 January 2014 12:46 Go to previous messageGo to next message
Mr ERFisher is currently offline  Mr ERFisher   United States
Messages: 7117
Registered: August 2005
Karma: 2
Senior Member
the real problem may be the vent lines are crimped
at the tank

you should be able to fill at full speed if all the vent lines are good

http://www.gmcmhphotos.com/photos/data/4634/TANK_VENTS1.pdf

gene


On Thu, Jan 9, 2014 at 9:50 AM, Larry <weidnerl@wwt.net> wrote:

>
>
> armandminnie wrote on Thu, 09 January 2014 11:44
> > Larry, the problem with that foam piece (as you now know)is that it can
> block the air from venting during fill - the rubber vapor-capture rig on
> the nozzle pulls the vapors back in. I also had a problem with the foam
> disintegrating when it contacted gasoline fumes. I use an ABS union (2-inch
> I think)that I cut off at an angle on my chop saw. It works great - might
> work without the angle too.
>
> Thanks Armand, How thick did you make the cut-off union?
> --
> Larry :)
> 78 Royale w/500 Caddy
> Menomonie, WI.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>



--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] Filling the GMC with gas in California. [message #235617 is a reply to message #235614] Thu, 09 January 2014 13:00 Go to previous messageGo to next message
Larry is currently offline  Larry   United States
Messages: 2875
Registered: January 2004
Location: Menomonie, WI
Karma: 10
Senior Member
Mr ERFisher wrote on Thu, 09 January 2014 12:46

the real problem may be the vent lines are crimped
at the tank

you should be able to fill at full speed if all the vent lines are good

http://www.gmcmhphotos.com/photos/data/4634/TANK_VENTS1.pdf

gene


Thanks Gene,
I plan to drop the tanks (again) this summer when we return home. This time I'm gonna put in steel vent lines.


Larry Smile
78 Royale w/500 Caddy
Menomonie, WI.
Re: [GMCnet] Filling the GMC with gas in California. [message #235620 is a reply to message #235592] Thu, 09 January 2014 14:09 Go to previous messageGo to next message
Mr ERFisher is currently offline  Mr ERFisher   United States
Messages: 7117
Registered: August 2005
Karma: 2
Senior Member
this spacer breathes


http://gmcmotorhome.info/Fuel.html#nozzle




On Thu, Jan 9, 2014 at 8:52 AM, Larry <weidnerl@wwt.net> wrote:

>
>
> I've only filled my GMC with gas once several years ago, and the
> experience left me with about 2 gallons of gas on me,the coach, and the
> cement pad around me. I used a 2" cutoff from a foam noodle to adapt the
> dispenser to the GMC filler. (a suggestion I found on the GMCnet) The
> dispenser did not cut off when full and pumped in extra gas...I figure
> expanding the tanks a little. When things didn't seem right to me, I
> manually shut it off and removed the nozzle. A lot of gas gushed out
> soaking me, the coach and the station pump.
>
> I filled with fuel at the Arizona border before entering California. I
> plan to do some traveling here, so do not want to experience a spill like
> this again.
>
> What did I do wrong and what is the proper way to fill the GMC with fuel
> in California?
> --
> Larry :)
> 78 Royale w/500 Caddy
> Menomonie, WI.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>



--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: Filling the GMC with gas in California. [message #235622 is a reply to message #235592] Thu, 09 January 2014 14:39 Go to previous messageGo to next message
kerry pinkerton is currently offline  kerry pinkerton   United States
Messages: 2565
Registered: July 2012
Location: Harvest, Al
Karma: 15
Senior Member
What is unique about California? Well, I know there are LOTS of things unique about California but specifically what is different about their gas nozzles. Not planning on going there...just curious.

Kerry Pinkerton - North Alabama Had 5 over the years. Currently have a '06 Fleetwood Discovery 39L
Re: [GMCnet] Filling the GMC with gas in California. [message #235624 is a reply to message #235622] Thu, 09 January 2014 14:52 Go to previous messageGo to next message
James Hupy is currently offline  James Hupy   United States
Messages: 6806
Registered: May 2010
Karma: -62
Senior Member
Fume recovery nozzles with a pump switch. The bellows on the nozzle must
hold a seal or the pump will not dispense fuel. The GMC fuel neck will not
seal, so a foam donut is often used over the neck to effect a seal. On some
stations it is a REAL PAIN IN THE BUTT to get their nozzles to seal. Brand
of gas does not seem to matter much. I personally do not like the hassle.
Other areas have similar nozzles (like Seattle, Wa.) but they are a
slightly different design and seem to be easier to use, at least to me.
Jim Hupy
Salem, Or.
78 GMC Royale 403
On Jan 9, 2014 12:39 PM, "Kerry Pinkerton" <Pinkertonk@mchsi.com> wrote:

>
>
> What is unique about California? Well, I know there are LOTS of things
> unique about California but specifically what is different about their gas
> nozzles. Not planning on going there...just curious.
> --
> Kerry Pinkerton
>
> North Alabama, near Huntsville,
>
> 77 Eleganza II, "The Lady", 403CI, also a 76 Eleganza being re-bodied as
> an Art Deco car hauler
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: Filling the GMC with gas in California. [message #235625 is a reply to message #235622] Thu, 09 January 2014 15:07 Go to previous messageGo to next message
armandminnie is currently offline  armandminnie   United States
Messages: 864
Registered: May 2009
Location: Marana, AZ
Karma: 2
Senior Member
Kerry Pinkerton wrote on Thu, 09 January 2014 13:39

What is unique about California? Well, I know there are LOTS of things unique about California but specifically what is different about their gas nozzles. Not planning on going there...just curious.

All you really have to do to make Calif. nozzles work is to hold them back using your finger or anything else you have. They do not have to seal - I think they must somehow mechanically sense that they are pushed into the filler neck far enough. The nozzle does recover the vapors that are pushed out of the tank so the spacer must allow vapors to pass and apparently Larry's didn't.


Armand Minnie
Marana, AZ
'76 Eleganza II TZE166V103202
visit my gmc blog
click here to visit gmcws.org
Re: [GMCnet] Filling the GMC with gas in California. [message #235626 is a reply to message #235620] Thu, 09 January 2014 15:12 Go to previous messageGo to next message
Gary Berry is currently offline  Gary Berry   United States
Messages: 1002
Registered: May 2005
Karma: -1
Senior Member
I got one of these "noodle" fuel things at Santa Rosa. When I was finished
filling up at the T/A in Corning and as I was putting the nozzle back the
wind blew it off of the fill tube and took it for a ride. The wind was
blowing really strong and away it went. I called it Wilson. I never saw it
again. It sure made it easy to fill up in CA.

On Thursday, January 9, 2014, gene Fisher <mr.erfisher@gmail.com> wrote:
> this spacer breathes
>
>
> http://gmcmotorhome.info/Fuel.html#nozzle
>
>
>
>
> On Thu, Jan 9, 2014 at 8:52 AM, Larry <weidnerl@wwt.net> wrote:
>
>>
>>
>> I've only filled my GMC with gas once several years ago, and the
>> experience left me with about 2 gallons of gas on me,the coach, and the
>> cement pad around me. I used a 2" cutoff from a foam noodle to adapt the
>> dispenser to the GMC filler. (a suggestion I found on the GMCnet) The
>> dispenser did not cut off when full and pumped in extra gas...I figure
>> expanding the tanks a little. When things didn't seem right to me, I
>> manually shut it off and removed the nozzle. A lot of gas gushed out
>> soaking me, the coach and the station pump.
>>
>> I filled with fuel at the Arizona border before entering California. I
>> plan to do some traveling here, so do not want to experience a spill like
>> this again.
>>
>> What did I do wrong and what is the proper way to fill the GMC with fuel
>> in California?
>> --
>> Larry :)
>> 78 Royale w/500 Caddy
>> Menomonie, WI.
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
>
>
>
> --
> Gene Fisher -- 74-23,77PB/ore/ca
> “Give a man a fish; you have fed him for today --- give him a URL and
> -------
> http://gmcmotorhome.info/
> Alternator Protection Cable
> http://gmcmotorhome.info/APC.html
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>

--
Gary and Diana Berry
73 CL Stretch in Wa.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] Filling the GMC with gas in California. [message #235628 is a reply to message #235620] Thu, 09 January 2014 15:32 Go to previous messageGo to next message
Larry is currently offline  Larry   United States
Messages: 2875
Registered: January 2004
Location: Menomonie, WI
Karma: 10
Senior Member
Mr ERFisher wrote on Thu, 09 January 2014 14:09

this spacer breathes


http://gmcmotorhome.info/Fuel.html#nozzle


Gene Fisher -- 74-23,77PB/ore/ca



Gene, That is what I was using when it dumped gas all over me. No troubles filling in AZ, NM, TX...etc.


Larry Smile
78 Royale w/500 Caddy
Menomonie, WI.
Re: Filling the GMC with gas in California. [message #235631 is a reply to message #235625] Thu, 09 January 2014 15:36 Go to previous messageGo to next message
Larry is currently offline  Larry   United States
Messages: 2875
Registered: January 2004
Location: Menomonie, WI
Karma: 10
Senior Member
armandminnie wrote on Thu, 09 January 2014 15:07

Kerry Pinkerton wrote on Thu, 09 January 2014 13:39

What is unique about California? Well, I know there are LOTS of things unique about California but specifically what is different about their gas nozzles. Not planning on going there...just curious.

All you really have to do to make Calif. nozzles work is to hold them back using your finger or anything else you have. They do not have to seal - I think they must somehow mechanically sense that they are pushed into the filler neck far enough. The nozzle does recover the vapors that are pushed out of the tank so the spacer must allow vapors to pass and apparently Larry's didn't.

Yesterday I filled my Honda Civic (Towd) and tried holding them back manually, but it would pump about 1/10th of a gal and shut-off. After trying several times to do this, I finally just shoved the nozzle in and filled no problem.


Larry Smile
78 Royale w/500 Caddy
Menomonie, WI.
Re: Filling the GMC with gas in California. [message #235635 is a reply to message #235622] Thu, 09 January 2014 16:39 Go to previous messageGo to next message
George B. is currently offline  George B.   United States
Messages: 213
Registered: February 2012
Karma: 1
Senior Member
The dispenser nozzles in Calif have a bellows that one has to force down on the filler neck. When the bellows are compressed it forms a seal between the nozzle and the filler neck. The GMC filler neck is recessed and at an angle that makes it difficult to impossible to insert the nozzle into the filler neck. I usually have to pull back and hold the bellows by hand to be able to insert the nozzle. Then I have to hold it like that most of the time while pumping

Several times I have got the nozzle & bellows stuck in the gas filler opening and have spent some time to work it free. I also have a 1971 Honda 600 Coupe that has a similar compartment for the gas filler neck. Recently I was filling it up at a Chevron station and managed to be able to let go of the nozzle and let it fill by itself. Well that car always gets lots of attention and while someone was distracting me wanting to buy the car someone else said "you are spilling gas." The darn thing did not shut off I guess due to the way the nozzle was jammed in there. Looked like a couple of gallons of gas spilled on the ground by the time I was able to shut it off. I went inside to tell the attendant about the spill but when he came out with a bag of cat litter he was more interested in the car than attending to the spill.


George Butts Las Vegas Nevada 73 "Custom 26' Q" & 76 23' Birchaven 71 Honda 600 Coupe & 01 Tracker Toads
Re: [GMCnet] Filling the GMC with gas in California. [message #235636 is a reply to message #235592] Thu, 09 January 2014 16:48 Go to previous messageGo to next message
gcbgold is currently offline  gcbgold   United States
Messages: 60
Registered: August 2012
Karma: -1
Member
Larry,

I had the exact same problem and it was caused by the vapor separator malfunctioning. Never had a problem filling the tanks in the last two years since I replaced it. No more back pressure when I take the gas cap off on a hot day either.

Gary Bovee
Red Bluff, CA
1978 GMC Royale
Free "Idiot's Internet Guide for Finding GMC MotorHome Information"
www.gmcidiotsguide.com

> On Jan 9, 2014, at 8:52 AM, Larry <weidnerl@wwt.net> wrote:
>
> What did I do wrong and what is the proper way to fill the GMC with fuel in California?
> --
> Larry :)
> 78 Royale w/500 Caddy
> Menomonie, WI.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: [GMCnet] Filling the GMC with gas in California. [message #235640 is a reply to message #235624] Thu, 09 January 2014 17:24 Go to previous messageGo to next message
Mr ERFisher is currently offline  Mr ERFisher   United States
Messages: 7117
Registered: August 2005
Karma: 2
Senior Member
They do not need to deal

You can hold up the boot with your finger

That is why this works
With a foam spacer

FREE WIFI @ Mickey D





On Jan 9, 2014, at 12:52 PM, James Hupy <jamesh1296@gmail.com> wrote:

> Fume recovery nozzles with a pump switch. The bellows on the nozzle must
> hold a seal or the pump will not dispense fuel. The GMC fuel neck will not
> seal, so a foam donut is often used over the neck to effect a seal. On some
> stations it is a REAL PAIN IN THE BUTT to get their nozzles to seal. Brand
> of gas does not seem to matter much. I personally do not like the hassle.
> Other areas have similar nozzles (like Seattle, Wa.) but they are a
> slightly different design and seem to be easier to use, at least to me.
> Jim Hupy
> Salem, Or.
> 78 GMC Royale 403
> On Jan 9, 2014 12:39 PM, "Kerry Pinkerton" <Pinkertonk@mchsi.com> wrote:
>
>>
>>
>> What is unique about California? Well, I know there are LOTS of things
>> unique about California but specifically what is different about their gas
>> nozzles. Not planning on going there...just curious.
>> --
>> Kerry Pinkerton
>>
>> North Alabama, near Huntsville,
>>
>> 77 Eleganza II, "The Lady", 403CI, also a 76 Eleganza being re-bodied as
>> an Art Deco car hauler
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Re: Filling the GMC with gas in California. [message #235641 is a reply to message #235635] Thu, 09 January 2014 17:54 Go to previous messageGo to next message
noi is currently offline  noi   United States
Messages: 293
Registered: October 2010
Location: South of Fremont
Karma: 0
Senior Member
George B. wrote on Thu, 09 January 2014 14:39

I also have a 1971 Honda 600 Coupe


George,

Whoa.... Way Cool

I had one as well.... A long time ago - It was THE most FUN car I have ever owned!

It was also the only car I have ever bought on the spot - I was driving by (I think I remember) a Pontiac dealership and saw an 1972 OD Green one sitting on the show room floor - I turned around, parked, went in, and sat in it - The salesman came up and said "can I help you"

I said.... I'll take it!!!!

He was kind of stunned that I would buy it without even test driving it.

For the next two years I drove the h3ll out and still got +40mpg (and that was when gas was $.25/gal) - Didn't hesitate to drive it from LA to San Francisco (drafting semi's on I5 was way loads of fun and could "almost" take my foot off the throttle Smile - Easy to work on (few qt's of oil&filter, some plugs&points, adj values = done) - With a dash shifter you hardly needed to move your hand off the steering wheel - Could nip&tuck through traffic as if it was a motorcycle with a body helmet (though driving NEXT to semi's was.... "interesting"

And not that I ever (cough cough) did this.... But I "heard" that it was never a problem for you and your friend(s) to get OUT of a parking lot controlled by an arm gate - The "rumor" was that there was JUST enough room to drive UNDER the arm if "someone" lifted up on it - Though "I" would NEVER have done that... No sir re, not me Rolling Eyes

Ahhh, way loads of fun - Thanks for the memory Wink

Oh, and the DW say's I can't offer to buy it from you Laughing

Carl P.
76 Birchaven
South of Fremont


Re: [GMCnet] Filling the GMC with gas in California. [message #235647 is a reply to message #235641] Thu, 09 January 2014 18:17 Go to previous messageGo to next message
Ronald Pottol is currently offline  Ronald Pottol   United States
Messages: 505
Registered: September 2012
Location: Redwood City, California
Karma: -2
Senior Member
Were any other Kei cars ever sold here? The Japanese class cars by size,
with width being a major factor (if you look at a lot of 1980s and early
1990s vintage Japanese cars, you can see how for the export market they
made them with fender flares and wider tires, cheap ways to take advantage
of the unrestricted US market), and the larger the size, the higher the
tax. Also, a Kei car (tiny car, 550cc motor) did not require you to show
proof of having a parking spot if you lived in Tokyo when buying. Or so
I've heard.

And the Coupe was small and light enough to easily be turned sideways in a
parking spot by enterprising passers by.

;-)


On Thu, Jan 9, 2014 at 3:54 PM, noi <v76_Birchaven@yahoo.com> wrote:

>
>
> George B. wrote on Thu, 09 January 2014 14:39
> > I also have a 1971 Honda 600 Coupe
>
>
> George,
>
> Whoa.... Way Cool
>
> I had one as well.... A long time ago - It was THE most FUN car I have
> ever owned!
>
> It was also the only car I have ever bought on the spot - I was driving by
> (I think I remember) a Pontiac dealership and saw an 1972 OD Green one
> sitting on the show room floor - I turned around, parked, went in, and sat
> in it - The salesman came up and said "can I help you"
>
> I said.... I'll take it!!!!
>
> He was kind of stunned that I would buy it without even test driving it.
>
> For the next two years I drove the h3ll out and still got +40mpg (and that
> was when gas was $.25/gal) - Didn't hesitate to drive it from LA to San
> Francisco (drafting semi's on I5 was way loads of fun and could "almost"
> take my foot off the throttle :) - Easy to work on (few qt's of oil&filter,
> some plugs&points, adj values = done) - With a dash shifter you hardly
> needed to move your hand off the steering wheel - Could nip&tuck through
> traffic as if it was a motorcycle with a body helmet (though driving NEXT
> to semi's was.... "interesting"
>
> And not that I ever (cough cough) did this.... But I "heard" that it was
> never a problem for you and your friend(s) to get OUT of a parking lot
> controlled by an arm gate - The "rumor" was that there was JUST enough room
> to drive UNDER the arm if "someone" lifted up on it - Though "I" would
> NEVER have done that... No sir re, not me :roll:
>
> Ahhh, way loads of fun - Thanks for the memory ;)
>
> Oh, and the DW say's I can't offer to buy it from you :lol:
>
> Carl P.
> 76 Birchaven
> South of Fremont
>
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>



--
Plato seems wrong to me today.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist



1973 26' GM outfitted
Re: Filling the GMC with gas in California. [message #235655 is a reply to message #235592] Thu, 09 January 2014 19:06 Go to previous messageGo to previous message
noi is currently offline  noi   United States
Messages: 293
Registered: October 2010
Location: South of Fremont
Karma: 0
Senior Member
Ronald,

I can't speak for other parts of the country, but I only remember Honda selling any "Kei Class" cars in Calif. - Then, and now.

Not to say some might have been "imported", but none from a dealership comes to mind.

Fiat is about the only other "70's" 500/600cc I can think of.

But I have always been a BIG fan of "micro cars" and just drool when I see what can be purchased in other countries.

And I sure hope you only "heard" about.... "And the Coupe was small and light enough to easily be turned sideways in a parking spot by enterprising passers by" Twisted Evil

Carl P.
Previous Topic: pulling radiator
Next Topic: New Axle
Goto Forum:
  


Current Time: Fri Oct 04 01:18:49 CDT 2024

Total time taken to generate the page: 0.17247 seconds