GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Auto transfer switch (Install one??)
Re: Auto transfer switch [message #348079 is a reply to message #347853] Wed, 18 September 2019 08:03 Go to previous messageGo to previous message
jhbridges is currently offline  jhbridges   United States
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma:
Senior Member
The 30 second (overkill) delay in some of the auto transfer switches is a low cost way to keep from having the AC essentially look at itself until the magnetic field in transformers and/or motors dies down. If the peak waveform of one source sees the peak of the other it may cause enough current to drop a breaker or open a fuse. (In high power setups it certainly will). It probably isn't necessary in the GMC unless the A/C is running and doesn't reset the compressor timer. Half a second is plenty. If you have a simple relay and the A/C breaker pops when you swap, that's why. Ask me how I know thism Smile

--johnny


Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: 77 Royale twin bunk rear bath
Next Topic: Circuit Breaker
Goto Forum:
  


Current Time: Sat Sep 28 08:13:24 CDT 2024

Total time taken to generate the page: 0.00655 seconds