Down to last leak [message #369809] |
Sat, 28 May 2022 16:15 |
JohnL455
Messages: 4447 Registered: October 2006 Location: Woodstock, IL
Karma: 12
|
Senior Member |
|
|
Went up to Kohler Andrea park and left Fri afternoon before the holiday tourist influx. Had torrential rains Wed night. I had double checked the front marker seal job I had done years ago and it looked ok. Drip is just right of rearview mirror top of windshield. Next morning I stood on bumper and finally saw where the urethane between the gasket and SMC had slightly pulled away from the SMC. I ordered some 3M windo- weld black urethane. I intend to mask, caulk and finger smooth the bead. Any thoughts on this as the correct product?
John Lebetski
Woodstock, IL
77 Eleganza II
[Updated on: Sat, 28 May 2022 16:16] Report message to a moderator
|
|
|
Re: Down to last leak [message #369816 is a reply to message #369809] |
Sun, 29 May 2022 08:56 |
boybach
Messages: 566 Registered: December 2020 Location: Vancouver Island
Karma: 4
|
Senior Member |
|
|
Although I have no idea what an SMC is lol any good urethane would be fine caulking the windshield frame at the top. reef out the old stuff and yes finger in the urethane, mask and clean up methyl hydrate. JWID fixed which fixed that exact THAT leak.
Larry
Larry - Victoria BC -
1977 ex-Palm Beach "Ol' Leaky" 40,000 miles, PO said everything working but forgot the word NOT. Atwood helium fridge, water heater & furnace. SS exhaust system, Onan, Iota Converter, R134A, New fuel lines & heat exchange hoses
|
|
|
Re: Down to last leak [message #369817 is a reply to message #369809] |
Sun, 29 May 2022 10:43 |
JohnL455
Messages: 4447 Registered: October 2006 Location: Woodstock, IL
Karma: 12
|
Senior Member |
|
|
SMC sheet molded compound or commonly (not totally correctly) called fiberglass
John Lebetski
Woodstock, IL
77 Eleganza II
|
|
|