Door Latch repair [message #356522] |
Wed, 08 July 2020 08:30 |
MikeB
Messages: 133 Registered: December 2018 Location: South Bama
Karma:
|
Senior Member |
|
|
I finally got my door curved enough to shut with secondary latching. Now it seems my lower latch jaw (LLJ) will lock initially but not secondary. The upper works fine. I took it apart and the cam that locks it seem to be working and the LLJ will lock as long as I put a little down pressure on the horizontal bar. Seems either a spring is missing or is weak somewhere or an adjustment is needed.
Is there a presentation or write up on adjustments for these mechanisms?
Also the lithium grease on it is old. What are y’all using to clean and lube these things?
Thanks
PS. I do not have email access to responses.
M Beam
75’ Avion
TBI EBL , 3.70 LSD and other stuff
Zuki Sidekick,
Dozier Al
[Updated on: Wed, 08 July 2020 08:30] Report message to a moderator
|
|
|