| good we are online again Olga update [message #249180] |
Fri, 09 May 2014 00:06  |
appie
Messages: 902
Registered: April 2013
Location: denmark
Karma:
|
Senior Member |
|
|
Missed the forum the last days
Had a airleak in the pump/valves area for a while and decided to do something about that
Thought it was the pressureswitch that was definitly not oem and got a viair one That was not the problem It is very difficult the find the leak with all these connections in one tight place
Now it is either a speciffik valve or the threaded connection to this valve
I ll go in town and buy some threadseal and hope it is that
Have been chasing a waterleak for months in the bedroom Found it now: Olga had a slight accident at some time, hence the fiberglassrepair on the left rearcorner and a slight dent on the far rear rubline
No the leak is through the H profile that connects the fiberglas bottom with the alu topside The accident broke the glue and the water running down the side runs through the H
'Hope the glue I added will hold
As to engine
I booked the workshop for next weekend where we have a 3 day weekend, but there are a few small problems
Dick Paterson has been very helpsome, but he a small accident that put him back a day Then I got a mail from him that he was rejected at the forwarder becource he used the wrong pallet: All wood tp europe has to be treated and stamped accordingly ! Bummer That means a other 150 Miles for him and for it means getting very close to my deadline I am very exited to get a ETA from the forwarder
I'll put som photos of the engine on the photoside Does not look like much The beauty is inside
Appie
eleganza 76 "Olga" now sadly sold
6 wheel discbrake
Quadrabags
Springfield stage 2 462 olds
Manny tranny
( pictures at http://www.gmcmhphotos.com/photos/g6489-olga.html
Fulltiming in Europe july 2014 til july 2016
Denmark
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
