GMCforum: GMCnet » Honda ev6010 in GMC

Home » Public Forums » GMCnet » Honda ev6010 in GMC

Show: Today's Messages :: Polls :: Message Navigator

Honda ev6010 in GMC [message #239827]

Thu, 13 February 2014 09:56

tphipps

Messages: 3005
Registered: August 2004
Location: Spanish Fort, AL

Karma:

Senior Member

I'm going to install an ev6010 in my GMC. Wondering about the mounting plate. My gen compartment is stripped of an Onan related items. You should have seen the ugly air cooled single cylinder Chinese made 6 Kw genset that P.O. had installed, withour a exhaust muffler, just straight pipe.
Anyhow, the question is have a metal mounting plate made, per Honda specs, or use 3/4 inch plywood like many have done.
Opinions please. But, only if you have actually installed one or had it done for you.
Tom, MS II

2012 Phoenix Cruiser model 2552 KA4CSG

Report message to a moderator

[Message index]

		Honda ev6010 in GMC By: tphipps on Thu, 13 February 2014 09:56
		Re: Honda ev6010 in GMC By: corleyw on Thu, 13 February 2014 10:13
		Re: [GMCnet] Honda ev6010 in GMC By: Mr ERFisher on Thu, 13 February 2014 11:16
		Re: [GMCnet] Honda ev6010 in GMC By: USAussie on Thu, 13 February 2014 15:17
		Re: Honda ev6010 in GMC By: Jim Galbavy on Thu, 13 February 2014 15:55

Previous Topic:	What has left you stranded on the side of the road
Next Topic:	[GMCnet] Patrick and whoever...

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Nov 19 23:17:15 CST 2024

Total time taken to generate the page: 0.00836 seconds