GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Re: [GMCnet] Oil galley plug
Re: [GMCnet] Oil galley plug [message #239211] Sat, 08 February 2014 15:06
Jim Bounds is currently offline  Jim Bounds   United States
Messages: 842
Registered: January 2004
Karma:
Senior Member


The problem is what is a stock motor. If thats a cheaply built one it will not last pulling 12000lb. You must have a well built motor and if thats so it would not cost anymore to do a few tjings that would make the motor work better to produce low rpm torque . It costs to build up a quality motor no matter what the spec.

Jim Bounds


------------------------------
On Fri, Feb 7, 2014 4:17 PM EST mike foster wrote:

>
>
>I don't see the problem with a stock engine. Know of far too many BBO's with 150,000+ miles and nothing more than rocker cover gaskets and oil pan gaskets and maybe a read main seal.
>
>Now, if you are drag racing an Olds you need to get the racing 500 cid block developed by Warren Johnson.
>_______________________________________________
>GMCnet mailing list
>Unsubscribe or Change List Options:
>http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

 
Read Message
Previous Topic: So, who's coach is this??
Next Topic: [GMCnet] E-15 fuel check it out
Goto Forum:
  


Current Time: Thu Nov 14 22:35:54 CST 2024

Total time taken to generate the page: 0.00797 seconds