GMCforum: GMCnet » [GMCnet] Black Tank Replacement

Home » Public Forums » GMCnet » [GMCnet] Black Tank Replacement

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Black Tank Replacement [message #239203]

Sat, 08 February 2014 14:01

jade

Messages: 163
Registered: August 2009

Karma: 0

Senior Member

When I replaced my black tank I cut the top off of the old tank & used it
for a template.
Worked great.
JADE
73 23'??
73 26' Painted Desert
Ajo, AZ.
KC7QGC

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Black Tank Replacement [message #239204 is a reply to message #239203]

Sat, 08 February 2014 14:20

Kingsley Coach

Messages: 2691
Registered: March 2009
Location: Nova Scotia Canada

Karma: -34

Senior Member

After a good rinse I assume...<g>

Mike

On Sat, Feb 8, 2014 at 4:01 PM, Jim Decheine <jade@tabletoptelephone.com>wrote:

> When I replaced my black tank I cut the top off of the old tank & used it
> for a template.
> Worked great.
> JADE
> 73 23'??
> 73 26' Painted Desert
> Ajo, AZ.
> KC7QGC
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
>

--
Michael Beaton
1977 Kingsley 26-11
1977 Eleganza II 26-3
Antigonish, NS

* This is my second trip through the 60's; the first time the drugs were
better !
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Black Tank Replacement [message #239267 is a reply to message #239203]

Sun, 09 February 2014 07:14

Jim Bounds

Messages: 842
Registered: January 2004

Karma: 0

Senior Member

For gm floorplan coaches like yours we can get the fittings installed beforehand. Cannot be with any of the Transmode models. The slip in compression fittings do work well witbout any sealant if the holes are cut right. Good luck,

Jim Bounds

-------- Original message --------
From: Mickey Szilagyi <mickey@apex-internet.com>
Date: 02/08/2014 2:26 PM (GMT-05:00)
To: gmclist@temp.gmcnet.org
Subject: Re: [GMCnet] Black Tank Replacement

Jim,

So you are saying to use the rubber grommets as the fittings that go in the top of the tank. They will seal around the ABS pipe that slips into them and they won't leak? Do you use any sealant or adhesive to hold them in place? Do you use anything on the pipes as a back up seal when sliding the pipes into the grommets?

Thanks!
--
Mickey
1977 Kingsley, 403, Lansing, MI
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Re: [GMCnet] Black Tank Replacement [message #239301 is a reply to message #239203]

Sun, 09 February 2014 13:16

Jim Bounds

Messages: 842
Registered: January 2004

Karma: 0

Senior Member

If you sent it to this addy it wenf in with the pile. Personals e mails should go to coopmotorworks@yahoo.com .

Its not rocket science just don't get it on ya! There are tips, too many to plunk about, call me. 321-299-5707.

Jim Bounds

-------- Original message --------
From: Mickey Szilagyi <mickey@apex-internet.com>
Date: 02/09/2014 10:34 AM (GMT-05:00)
To: gmclist@temp.gmcnet.org
Subject: Re: [GMCnet] Black Tank Replacement

Jim and everyone else.

Jim, I tried to send you a PM. Don't know if I'm doing it right but when I tried to send it it says you aren't accepting PMs.

We have read all the posts and are starting to buy all the parts, the tank, fittings and so forth. Everyone has been extremely helpful and we believe we have a workable plan in place to replace the black tank. We will post results if/when it works or not in hopes it will help someone else in the future. We will be doing this as soon as we get a little warmer weather. We're working in a barn but without heat.

We will be installing a macerator once the tank is in place and have a plan for that too. What type of hose is used as the discharge hose out of the macerator and where can we get it? Right now our plan is to use spa hose - Watts 1 inch ID PVC Spa Flex Hose that we can get through Home Depot, 50 ft for $50. If this isn't a good idea or something else is better please let us know.

Again, thanks to everyone for your input. Another weekend project that will take us all spring.

--
Mickey
1977 Kingsley, 403, Lansing, MI
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist

Report message to a moderator

Previous Topic:	Re: [GMCnet] Body side delamination....
Next Topic:	[GMCnet] Lifter Position on cam lobe

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Nov 15 22:36:26 CST 2024

Total time taken to generate the page: 0.01261 seconds