Re: [GMCnet] air pressure for Quadra Bag Rear Suspension System [message #239004] |
Thu, 06 February 2014 16:37 |
KB
Messages: 1262 Registered: September 2009
Karma:
|
Senior Member |
|
|
> For the record Dave Lenzi runs the Harrison system on his coach and has replaced one of the bags it comes with (Firestone P/N
> W01-358-3400 with Firestone P/N W01-358-7350) The 7350 is the bag used on the Q-Bag system. The 7350 is a larger OD bellows (7.44")
> vs the 3400 bellows (7.25"). He did that to reduce the amount of pressure required to get his Coachman Royale to ride height.
> Anticipating the next question; according to Dave you cannot run two 7350's on the Harrison system.
Correction: having been down this road, for the harrison system you need
air bags with offset fill ports. The ones on the q-bag have the fill in the center.
The equivalent larger bags for the harrison system are: W21-358-7325
Also, all the references I've seen show the Q-bag uses W01-358-7325.
I'm not finding any hits for W01-358-7350 at the various truck spring sites;
not sure it's a valid number.
I see no reason why you can't put two of these on the harrison system to
replace both of the smaller bags he supplied originally. I currently have
the bigger bags only on the mid wheels, but will probably replace the rear
ones too at some point.
jwid,
Karen
1973 23'
1975 26'
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://temp.gmcnet.org/cgi-bin/mailman/listinfo/gmclist
Karen
1975 26'
San Jose, CA
|
|
|