GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » New garage
New garage [message #234437] Mon, 30 December 2013 08:19 Go to previous message
Rick Williams is currently offline  Rick Williams   United States
Messages: 256
Registered: July 2004
Karma:
Senior Member
Happy New Year

After 30 years, I have moved. A friend once said if he had to move, he would burn it all down and start over. I should have taken his advice. Boy did I accumulate stuff in 30 years. I had built a pole barn and had a service pit built at my last place. The pit was constructed using poured concrete walls. I have completed the pole barn (42'x56') at my new location but the concrete floor will have to wait until spring. It is -3 F as I write this. I have received quotes for poured wall construction and for block wall construction. Block is a few hundred dollars less. The cores of a block wall will be filled with concrete with rebar. Do any of you have experience with or opinions on poured versus block construction of a pit?
By the way, my new location is 15 miles southwest of Mackinaw City, Michigan on 41 acres near the village of Bliss (a general store, cemetery and a volunteer fire hall). There is room for visitors so if any of you have plans for Michigan this summer, you are welcome here. Thanks in advance for any input.

Rick


Rick Williams
Bliss, Michigan
1978 Eleganza II
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: New generators
Next Topic: [GMCnet] Painting the plastic panels up front
Goto Forum:
  


Current Time: Fri Oct 04 19:25:04 CDT 2024

Total time taken to generate the page: 0.01322 seconds